-16-
Child safety
Child restraint anchorage
fitting locations
WARNING
Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitting child
restraints. Under no circumstances are
they to be used for adult seat belts,
harnesses or for attaching other items or
equipment to the vehicle.
One factory installed child restraint
anchor fitting is provided, in each of the
rear seat backs of your vehicle, as
illustrated.
The anchor fittings are only suitable for
child restraints conforming to Australian
Standards AS1754-1991 or later. If your
child restraint does not have an
approved latched hook attaching clip as
shown, you should consult an approved
Restraint Fitting Station.
The diagram shows the correct
assembly and orientation of the
attaching clip to anchor fittings.
WARNINGS
Make sure the top tether strap
is not slack or twisted and is
properly located on the anchor point.
Always ensure that the attaching
clip is properly engaged with the
anchor fitting and the tether strap length
is adjusted to remove any slack.
Incorrectly fitted child restraints
may swing, tip or come away
causing death or injury.
Содержание FOCUS LV
