Occasional or intermittent brake squeal may result from environmental
conditions such as cold, hot, wet, snow, salt, mud, etc. This condition will
not affect braking effectiveness. The brakes should be checked only if
squeal occurs continuously with every application.
If brakes do not grip well
•
If you have been driving through deep water, gently apply the brakes
several times while the vehicle is moving slowly.
•
Let the brakes cool if you have been using them excessively, as in
mountain driving or after several fast, high speed stops.
•
Check brake adjustment.
•
Check brake linings for excessive wear.
•
Check system air pressure.
Air brakes
After starting the engine, give the air compressor time to build up the air
pressure to 414 kPa (60 psi) before moving the vehicle.
Do not drive or continue to drive if the low air pressure buzzer
is sounding or the brake warning light is lit. These warnings
indicate that air pressure is not to normal operating level. Continued
use of the vehicle could result in loss of braking ability.
Avoid repeated light application of the brake pedal. This will
deplete air pressure faster and could result in loss of braking
capability.
Periodically check the air pressure
gauge while driving. Pressure should
range between approximately 703 to
930 kPa (105-135 psi). The air
compressor governor cut-in and
cut-out pressure settings are preset
at the factory and are not
adjustable.
0
30
120
90
60
150
AIR
PRESSURE
PSI
Driving
114
Содержание F-650 2001
Страница 7: ...Instrumentation 7...