WARNING:
Switch off the running
boards before jacking or placing any
object under your vehicle. Never place
your hand between the extended running
board and your vehicle. A moving running
board may cause injury.
Note:
Only use the spare tire carrier to stow
the tire and wheel combination provided
with your vehicle. Other tire and wheel
combinations can cause the tire carrier to
fail.
Note:
Do not use impact tools or power
tools operating at over 200 RPM on the
spare tire carrier, this could cause a winch
malfunction and prevent a secure fit.
Override the winch at least three times,
there's an audible click each time, to make
sure the wheel and tire have been tightened
securely.
Note:
Passengers should not remain in the
vehicle when the vehicle is being jacked.
Park on a level surface, activate the hazard
flashers and set the parking brake. Then,
place the transmission in park (P) and turn
the engine off.
Removing the Vehicle Jack and
Tool Bag
The vehicle jack and tool bag are on the
rear passenger side of your vehicle, behind
the passenger seat.
E323384
1.
Turn the wing bolt on the jack bracket
counterclockwise to release the jack
and tool bag from the jack bracket.
E327650
2. Remove the jack and tool bag from the
jack bracket.
E323386
3. Release the jack tool bag straps.
122
F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202008, First-Printing
Changing a Road Wheel
Содержание F-150 2021
Страница 3: ......
Страница 7: ...4 F 150 TFD Canada United States of America enUSA Edition date 202008 First Printing...