5. Within 10 seconds, place a second
programmed intelligent access key in
the backup slot and press the push
button ignition switch.
The factory-set code appears in the
information display for a few seconds.
Note:
You need to have two programmed
intelligent access keys for this procedure.
Note:
The code may not display until after
any other warning messages first display.
KEYLESS ENTRY SETTINGS
Switching Keyless Entry On and
Off
1.
Switch the ignition on using an original
key that has not been created as a
MyKey.
2. Press
Settings
on the touchscreen.
3. Press
Vehicle Settings
.
4. Press
Locks
.
Reprogramming the Unlocking
Function
You can enable two-stage unlocking
function allowing you to unlock only the
driver door when you touch the unlock
sensor.
Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking.
If you program the unlocking function so
that only the driver door unlocks, you can
unlock all of the other doors from inside
your vehicle using the power door lock
control. You can unlock individual doors
by pulling the interior door handles on
those doors.
Creating Personal Access Codes
To create your own personal access code:
1.
Enter the factory-set code.
2. Press
1·2
on the keypad within five
seconds.
3. Enter your personal five-digit code.
4. Press
1·2
on the keypad to save
personal code one.
The doors lock then unlock to confirm that
programming was successful.
To program additional personal access
codes, repeat Steps 1-3, then for Step 4:
•
Press
3·4
to save personal code two.
•
Press
5·6
to save personal code three.
•
Press
7·8
to save personal code four.
•
Press
9·0
to save personal code five.
Hints:
•
Do not set a code that uses five of the
same number.
•
Do not use five numbers in sequential
order.
•
The factory-set code works even if you
have set your own personal code.
Clearing All Personal Access
Codes
1.
Enter the factory-set five-digit code.
2. Press and release
1·2
on the keypad
within five seconds.
3. Press and hold
1·2
for a few seconds.
This must be done within five seconds
of completing Step 2.
All personal codes erase and only the
factory-set five-digit code works.
74
Escape (CTC) Canada/United States of America, Vehicles Built From: 02-11-2020, enUSA, Edition date: 202011, First-Printing
Keyless Entry
(If Equipped)
Содержание ESCAPE 2021
Страница 3: ......
