CREATING A MYKEY
Use the information display to create a
MyKey. There are two types of information
displays, and their controls and messaging
vary. To determine which type of display
you have, you will need to reference
another chapter. See (page 89).
If You Have a Type 1 Information
Display:
1.
Insert the key you want to program into
the ignition.
2. Switch the ignition on.
3. Access the main menu on the
information display controls. Press
SETUP
using the information display
buttons until
PRESS RESET TO
CREATE MYKEY
is displayed.
4. Press and release the
RESET
button.
You will see
HOLD RESET TO
CONFIRM MYKEY
in the display.
5. Press and hold the
RESET
button for
two seconds until you see the message
MARK THIS AS RESTRICTED
in the
display. Wait until you see
KEY
RESTRICTED AT NEXT START
in the
display.
If You Have a Type 2 Information
Display:
1.
Insert the key you want to program into
the ignition.
2. Switch the ignition on.
3. Access the main menu on the
information display controls, and select
SETTINGS
, then
MYKEY
by pressing
OK
or the
>
button.
4. Press
OK
or the
>
button to select
CREATE A MYKEY
.
5. When prompted, hold the
OK
button
until you see
KEY RESTRICTED AT
NEXT START
in the display. The key
will be restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can also program configurable
settings for the key(s). Refer to
Programming/Changing Configurable
Settings
.
Programming/Changing
Configurable Settings
Use the information display to program or
change your configurable MyKey settings.
There are two types of information
displays, and their controls and messaging
vary. To determine which type of display
you have, you will need to reference
another chapter. See (page 89).
If You Have a Type 1 Information
Display:
1.
Switch the ignition on using an admin
key.
2. Access the main menu on the
information display controls, and press
SETUP
until
RESET FOR MYKEY
SETTINGS
displays.
3. Press and release the
RESET
button
to display MyKey setup menus.
4. Press the
SETUP
button to enter your
choice. Once you make a selection, the
next configurable setting will be
displayed.
5. Repeat Steps 3 and 4 until you are
done changing the configurable
settings.
If You Have a Type 2 Information
Display:
1.
Switch the ignition on using an admin
key.
2. Access the main menu on the
information display controls, and select
SETTINGS
, then
MYKEY
by pressing
OK
or the
>
button.
52
Super Duty (TFA) Canada/United States of America, enUSA, First Printing
MyKey™
Содержание 2016 SUPER DUTY
Страница 3: ......
Страница 9: ...6 Super Duty TFA Canada United States of America enUSA First Printing ...
Страница 497: ...494 Super Duty TFA Canada United States of America enUSA First Printing ...