Inverter system controller.
E
Brake fluid reservoir cap. See
Brake Fluid Check
(page 227).
F
Power distribution box. See
Fuses
(page 209).
G
Inverter system controller coolant reservoir cap.
H
Windshield washer fluid reservoir cap. See
Washer Fluid Check
(page 227).
I
ENGINE OIL DIPSTICK
A
B
E169062
MIN
A
MAX
B
ENGINE OIL CHECK
Check the level before starting the engine
and make sure that the level is between
the MIN and the MAX marks.
1.
Make sure that your vehicle is on level
ground.
2. Switch the engine off and wait 10
minutes for the oil to drain into the oil
pan.
3. Remove the dipstick and wipe it with
a clean, lint-free cloth. Replace the
dipstick and remove it again to check
the oil level.
If the oil level is at the minimum mark, add
oil immediately.
Adding Engine Oil
Note:
Do not remove the filler cap when
the engine is running.
Note:
Do not add oil further than the MAX
mark. Oil levels above the MAX mark may
cause engine damage.
E142732
Only use oils certified for gasoline engines
by the American Petroleum Institute (API).
An oil with this trademark symbol
conforms to the current engine and
emission system protection standards and
fuel economy requirements of the
International Lubricants Specification
Advisory Council (ILSAC), comprised of
U.S. and Japanese automobile
manufacturers.
1.
Remove the filler cap.
2. Add engine oil that meets the Ford
specifications. See
Capacities and
Specifications
(page 276).
3. Wipe off any spilled oil.
4. Replace the filler cap. Turn it until you
feel a strong resistance.
222
C-MAX (CCG) Canada/United States of America, enUSA, First Printing
Maintenance