Ignition Modes
E142555
The keyless starting system has three
modes:
•
Off:
Turns the ignition off.
•
Without applying the brake pedal,
press and release the button once
when the ignition is in the on mode,
or when the vehicle is on but not
moving.
•
On:
All electrical circuits are
operational and the warning lamps and
indicators illuminate.
•
Without applying the brake pedal,
press and release the button once.
•
Start:
Starts the vehicle into Ready to
Drive mode (indicated by the green
"Ready to Drive" icon on the instrument
cluster). The engine may not start
when the vehicle starts.
•
Press the brake pedal, and then
press the button until the vehicle
turns on.
STARTING A GASOLINE
ENGINE
When the engine starts for the first time
on your drive, the idle speed increases, this
helps to warm up the engine. If the engine
idle speed does not slow down
automatically, have your vehicle checked
by an authorized dealer.
Before starting the vehicle, check the
following:
•
Make sure all occupants have fastened
their safety belts.
•
Make sure the headlamps and
electrical accessories are off.
•
Make sure the parking brake is on.
•
Move the transmission selector lever
to position
P
.
•
Turn the ignition key to position
II
. If
your vehicle is equipped with a keyless
ignition, see the following instructions.
Vehicles with an Ignition Key
Note:
Do not touch the accelerator pedal.
1.
Fully press the brake pedal.
2. Turn the key to position
III
to start the
vehicle. Release the key when the
vehicle starts.
Note:
Cranking may last for up to 15
seconds, or until the vehicle starts.
Note:
If you cannot start the vehicle on the
first try, wait for a short period and try again.
Vehicles with Keyless Start
Note:
Do not touch the accelerator pedal.
1.
Fully press the brake pedal.
2. Press the button.
130
C-MAX (CCG) Canada/United States of America, enUSA, First Printing
Starting and Stopping the Engine