WINDSHIELD WASHERS
Note:
Do not operate the wipers on a dry windshield. This may scratch
the glass, damage the wiper blades or cause the wiper motor to burn out.
Always use the windshield washer before wiping a dry windshield.
Note:
Do not operate the washer when the washer reservoir is empty.
This may cause the washer pump to overheat.
Press the end of the stalk to
activate the washer.
•
A brief press causes a single wipe without washer fluid.
•
A quick press and hold causes the wipers to swipe three times with
washer fluid.
•
A long press and hold will activate the wipers and washer fluid for up
to 10 seconds.
A wipe will occur a few seconds after washing to clear any remaining
washer fluid. You can switch this feature on and off in the information
display.
REAR-WINDOW WIPER AND WASHERS
Rotate the control to select:
2
— Intermittent operation
(shortest pause between wipes).
1
— Intermittent operation (longest
pause between wipes).
0
— Off.
Rotate and hold the control to either the top or bottom position to
activate the rear washer. The control will return to the
2
or
0
position
when you release it.
Wipers and Washers
97
2015 Flex
(471)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)