FASTENING THE SEATBELTS
WARNINGS
Insert the tongue into the buckle until
you hear a distinct click. You have
not fastened the safety belt properly
if you do not hear a click.
Make sure that your safety belt is
securely stored and is not outside the
vehicle when closing the door.
Note:
Fasten the safety belt only with the
vehicle at a standstill, and never when the
vehicle is moving. It may lock if you pull it
sharply or if the vehicle is on a slope.
Always use the safety belts and child
restraint systems.
The upper belt strap should rest on the
shoulder, never over the neck. The lower
belt strap should be placed over the pelvic
area, never over the stomach.
Never use one belt for more than one
person. Make sure the belts are not twisted
or loose, nor obstructed by other
passengers or packages.
Do not recline the front seat backrests
excessively, as the safety belts only provide
maximum protection when the backrests
are in a nearly vertical position.
Retractable-inertial three-point safety
belts
Three-point safety belts are available with
the front seats and outboard position for
the rear seats. Keep the safety belt buckle
on the rear floor free from luggage or
objects.
Buckling the safety belt
Pull the belt with a steady movement to
avoid a block. Insert the tongue tab into
the buckle until you hear a click, and make
sure it is locked in place. To tighten the rear
center lap belt, pull the loose end through
the tongue until the belt is comfortably
adjusted around the hips.
E165534
Releasing the safety belt
Press the red button on the buckle, then
let the belt roll up smoothly and
completely.
E74124
22
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Seatbelts
Содержание 2015 Figo
Страница 1: ...FORD FIGO FIGO ASPIRE ASPIRE Owner s Manual ...
Страница 111: ...Engine Compartment Fuse Box E208369 109 Figo CDU E4B5 19A321 ZCA enIND Edition date 06 2015 Second Printing Fuses ...
Страница 118: ...Engine Compartment Fuse Box E208369 116 Figo CDU E4B5 19A321 ZCA enIND Edition date 06 2015 Second Printing Fuses ...