Ford 2013 Transit Connect, Руководство пользователя

Страница: 188 / 296

Sealant bottle A
Bottle lid B
Orange cap C
Compressor switch D
Power plug with cable E
Pressure relief valve F
Protective cap G
Hose H
Bottle holder I
Label J
Pressure gauge K
1. Peel off the label J showing the
maximum permissible speed of
50 mph (80 km/h) from the casing and
attach it to the instrument panel in the
driver’s field of view. Make sure the
label does not obscure anything
important.
2. Take the hose H and the power plug
with cable E out of the kit.
3. Unscrew the orange cap C and the
bottle lid B.
4. Screw the sealant bottle A clockwise
into the bottle holder I fully tight.
5. Remove the valve cap from the
damaged tire.
6. Detach the protective cap G from the
hose H and screw the hose H firmly
onto the valve of the damaged tire.
7. Make sure that the compressor switch
D is in position 0 and the pressure relief
valve F is closed.
8. Insert the power plug E into the cigar
lighter socket or auxiliary power point.
See
Cigar Lighter (page 95). See
Auxiliary Power Points (page 95).
9. Start the engine.
10. Move the compressor switch D to
position 1.
11. Inflate the tire for no longer than 10
minutes to an inflation pressure of
minimum 1.8 bar (26 psi) and a
maximum of 3.5 bar (51 psi). Move
the compressor switch D to position
0 and check the current tire pressure
with pressure gauge K.
Note: When pumping in the sealant through
the tire valve, the pressure may rise up to
6 bar (87 psi) but will drop again after about
30 seconds.
186
Transit Connect () Long Wheelbase Double Cab in Van/Long Wheelbase Van/Short Wheelbase Double Cab in Van/Short Wheelbase Van, Short Wheelbase Kombi/Kombi BaseLong Wheelbase Kombi/Kombi BaseLong Wheelbase Kombi/Kombi TrendShort Wheelbase Kombi/Kombi Trend
Wheels and Tires