•
Never overload your tires. The maximum load capacity and maximum
inflation pressure are molded into the sidewall of your tire.
Overloading builds up excessive heat and can lead to early tire failure.
•
Avoid damaging objects (such as chuckholes, glass, rocks and curbs)
which may cause internal tire damage. Continued use of a tire that has
suffered internal damage, which may not be visible externally, can lead
to dangerous tire failure. Determination of internal damage will require
dismounting of the tire and examination by trained tire personnel.
•
Improper tire mounting and inflation procedures may cause the tire
beads to break with explosive force during installation of the tire on
the rim. Tire and rim must match in size. Rim parts must match by
manufacturer’s design. Clean rim. Lubricate rim and beads. Do not
exceed the maximum recommended pressure to seat the beads. Only
trained tire personnel should mount tires.
•
Use of worn-out tires (less than 2/32nd inch (1.6 mm) of tread depth)
increases the probability of tire failure.
•
Excessive speeds create heat buildup in a tire, leading to possible tire
failure.
•
Maxxis strongly recommends tire rotation every 5,000 to 7,500 miles
(8,000 to 12,000 kilometers).
•
The Maxxis brand temporary spare tire weighs less than a
conventional radial tire. The temporary tire should be used only in
emergencies and returned to the trunk as soon as it is convenient to
have your standard tire repaired or replaced.
CONTACT INFORMATION
Any time you see damage to your Tires or wheels, immediately contact a
Vehicle Manufacturer Dealer or Maxxis Dealer. If further assistance is
required, please contact:
Maxxis International - U.S.A.
1-866-509-7067
Or write:
Maxxis Technology Center
480 Old Peachtree Road,
Suwanee, GA 30024 USA
MAXXIS®
41
2013 Tire Warranty
(stn)
Supplement, 1st Printing, September 2012
USA
(fus)