The system switches the low beam
headlamps on at a reduced intensity in
daylight conditions.
To switch the system on, switch the
ignition on, and switch the lighting control
to the off, autolamp or parking lamp
position.
AUTOMATIC HIGH BEAM
CONTROL
(IF EQUIPPED)
The system will automatically turn on your
high beams if it is dark enough and no other
traffic is present. When it detects an
approaching vehicle’s headlights, a
preceding vehicle’s tail lamps or street
lighting, the system will turn off the high
beams before they distract other drivers.
The low beams remain on.
Note:
If it appears that automatic control
of the high beams is not functioning
properly, check the windshield in front of
the camera for blockage. A clear view of the
road is required for proper system operation.
Any windshield damage in the area of the
camera field-of-view should be repaired.
Note:
If a blockage is detected (e.g. bird
dropping, bug splatter, snow, or ice) and no
changes are observed, the system will go
into low beam mode until the blockage is
cleared. A message may also appear in the
instrument cluster display noting the front
camera is blocked.
Note:
Typical road dust, dirt and water
spots will not affect the automatic high
beam system’s performance. However, in
cold or inclement weather conditions, the
automatic high beam system's availability
may be decreased, especially at startup. If
you want to change the beam state
independently of the system, you may turn
the high beams ON or OFF using the
multifunction switch lever. Automatic
control will resume when conditions are
correct.
Note:
Modification of the vehicle ride height
(e.g. using much larger tires) may degrade
feature performance.
A camera sensor is centrally mounted
behind the windshield of the vehicle, and
monitors conditions continuously to decide
when to switch the high beams off and on.
Once the system is active, the high beams
will switch on if:
•
The ambient light level is low enough
that high beams are needed.
•
There is no traffic in front of the vehicle.
•
The vehicle speed is greater than
25 mph (40 km/h).
The high beams will switch off if:
•
An approaching vehicle's headlights or
a preceding vehicle's tail lamps are
detected.
•
Vehicle speed falls below 16 mph
(25 km/h).
•
The ambient light level is high enough
that high beams are not required.
•
Severe rain, snow, or fog is detected.
•
The camera is blocked.
Activating the System
Switch on the system using the information
display and autolamps. See
Information
Displays
(page 83). See
Autolamps
(page 67).
E142451
69
Fusion/Mondeo (CC7)
Lighting
