4. Within 10 seconds, place a second
programmed intelligent access key in
the backup slot and press the
START/STOP
button.
5. Wait 5 seconds, then press the
START/STOP
button again.
6. Remove the intelligent access key.
7.
Wait 5 seconds, then place the
unprogrammed intelligent access key
in the backup slot and press the
START/STOP
button.
Programming is now complete. Verify the
remote control functions operate and the
vehicle starts with the new intelligent
access key.
If programming was not successful, wait
10 seconds and repeat Steps 1 through 7.
If you are still unsuccessful, take your
vehicle to your authorized dealer.
ANTI-THEFT ALARM
The system will warn you of an
unauthorized entry to your vehicle. It will
be triggered if any door, the luggage
compartment or the hood is opened
without using the key, remote control or
keyless entry keypad.
The direction indicators will flash and the
horn will sound if unauthorized entry is
attempted while the alarm is armed.
Take all remote controls to an authorized
dealer if there is any potential alarm
problem with your vehicle.
Arming the Alarm
The alarm is ready to arm when there is
not a key in the ignition. Electronically lock
the vehicle to arm the alarm.
Disarming the Alarm
Disarm the alarm by any of the following
actions:
•
Unlock the doors or luggage
compartment with the remote control
or keyless entry keypad.
•
Switch the ignition on or start the
vehicle.
•
Use a key in the driver’s door to unlock
the vehicle, then switch the ignition on
within 12 seconds.
Note:
Pressing the panic button on the
remote control will stop the horn and signal
indicators, but will not disarm the system.
61
Security
Содержание 2013 FUSION ENERGI
