Clear
Touching this button erases the GO Time
and cabin conditioning temperature.
Save
Touching this button stores the GO Time
and temperature settings.
Note:
If you select a My GO Time, but
choose
Off
for the temperature setting, the
vehicle schedules charging to be complete
by your GO Time and does not condition the
cabin.
Note:
Make sure you save your settings
before returning to the previous screen. If
you do not touch
Save
, your settings are not
stored in the system.
Value Charge Profiles
Touch the
Edit
button next to the profile
name to see the value charge profiles.
Default
This displays the charging mode and
off-peak times for your Default Value
Charge profile. The system displays
off-peak times for weekdays; the
remaining hours of the day are considered
peak time. The system displays similar
off-peak times for weekend days.
•
Charge Now
if you want your vehicle
to immediately charge when you plug
it in at this profile location.
•
Value Charge
if you want to take
advantage of off-peak electricity rates.
The vehicle optimizes the charge
schedule to be complete by the next
GO Time.
•
Edit
to access your Default Value
Charge Profile settings screen (see
Default Value Charge Profile later in
this section).
Customer Defined Value Charge Profiles
Once you create profile names, this section
displays the Value Charge Profile names
and current Charge Mode for specific
locations. You can set up and edit these
profiles using the MyFord Mobile internet
or smartphone application. You can
program up to nine unique charge profiles.
Default Value Charge Profile
Weekday and Weekend
Touch the
Edit
button to set the off-peak
charge times. Set the Weekday times and
Weekend time (by touching the
Weekday
and
Weekend
buttons), then touch
Save
.
The system does not store your settings
until you make selections for both
Weekday and Weekend. If you touch the
back arrow button to return to the previous
screen without saving your settings, the
system does not store them and you need
to enter them again.
Start and Finish
These buttons display the times, which you
can modify, using the following:
•
+
and
-
allow you to change the hours
of your start and finish times.
•
AM
and
PM
allow you to change the
time of your start and finish time. This
setting is viewable in 12-hour mode.
240V and 120V
These represent the voltage service the
default profile is using. The system uses
this selection to calculate estimated
charge times.
Clear
Touching this button erases the Default
Value Charge preferences.
397
MyFord Touch™
(If Equipped)
Содержание 2013 FUSION ENERGI
