Ford 2011 Edge страница 303 Скачать руководство пользователя

Страница: 303 / 403

Removing the spare tire and jack

1. Lift the carpeted load floor panel
located in the rear of the vehicle.

2. Remove the spare tire cover (if
equipped).

3. Remove the wing nut securing
the spare tire by turning it
counterclockwise.

4. Remove the washer.

5. Lift and remove the temporary
spare tire from the cargo area.

6. Remove the jack assembly from
the vehicle. Loosen the bag tabs and
remove the jack and lug wrench
from the bag.

7. Fold down the wrench socket
used to loosen the lug nuts and
operate the jack.

Tire change procedure

WARNING:

When one of the front wheels is off the ground, the

transmission alone will not prevent the vehicle from moving or

slipping off the jack, even if the vehicle is in P (Park).

WARNING:

To help prevent the vehicle from moving when you

change a tire, be sure to place the transmission in P (Park), set

the parking brake and block (in both directions) the wheel that is
diagonally opposite (other side and end of the vehicle) to the tire
being changed.

WARNING:

If the vehicle slips off the jack, you or someone else

could be seriously injured.

Roadside Emergencies

303

2011 Edge

(edg)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2011 Edge




















































































































































































































































































































































































































Результаты поиска

Содержание 2011 Edge

Отзывы:

Похожие инструкции для 2011 Edge

Бренды по названию

Популярные бренды

Ford 2011 Edge, Руководство пользователя

Результаты поиска

Содержание 2011 Edge

Отзывы:

Похожие инструкции для 2011 Edge

Бренды по названию

Популярные бренды