POWER LIFTGATE
The liftgate can be operated by the following:
•
Instrument panel control button
•
Key fob button
•
Outside control button
•
Control button in the rear cargo area
Note:
The liftgate can be reversed with a second press on a control
button or key fob and can be manually closed at any time.
Opening and closing the power liftgate:
WARNING:
Make sure all persons are clear of the power liftgate
area before using the power liftgate control.
WARNING:
Keep keys out of reach of children. Do not allow
children to play near an open or moving power liftgate.
The liftgate will only operate with the vehicle in P (Park). The chime will
beep once if conditions are not correct to start an operation. These
conditions include:
•
The ignition is in on and the transmission is not in P (Park)
•
The battery voltage is below the minimum operating voltage
•
The vehicle speed is at or above 3 mph (5 km/h)
If the liftgate reverses and starts to close after a open request, a fast
continuous chime indicates excessive load on the gate or a possible strut
failure. If any excessive load is removed and you still have a faster
chime, have the system serviced immediately by your authorized dealer.
Do not attempt to manually force the liftgate to travel faster than the
power system will permit. This will activate the obstacle detection
feature.
Note:
Cycling the ignition prior to completely latching the liftgate could
result in damage to the liftgate and/or its power components. Make sure
the liftgate is fully latched before operating the vehicle.
Driver Controls
125
2010 Navigator
(nav)
Owners Guide
(own2002)
, 1st Printing
USA
(fus)
