Ford 2008 Escape, Схемы проводки

Страница: 19 / 219

16
Electrical System General Procedures
00P
Form No. F1A3-20-06C
Terminals
Inspection
• Pull lightly on individual wires to verify that they are
secured in the terminal.
Replacement
• Use the appropriate tools to remove a terminal as
shown. When installing a terminal, be sure to insert it
until it locks securely.
• Insert a thin piece of metal from the terminal side of
the connector and with the terminal locking tab
pressed down, pull the terminal out from the
connector.
Sensors, Switches, And Relays
• Handle sensors, switches, and relays carefully. Do not
drop them or strike them against other objects.
Fuse
Replacement
• When replacing a fuse, be sure to replace it with one
of the same capacity. If a fuse fails again, the circuit
probably has a short and the wiring should be
inspected.
• Be sure the negative battery terminal is disconnected
before replacing a main fuse.
X3U000WB5
X3U000WB6
NO GOOD
YMU000WA1
X3U000WB4
F1A3-20-06C_GI.fm Page 16 Thursday, March 23, 2006 7:46 PM