Setting speed control
The controls for using your speed
control are located on the steering
wheel for your convenience.
1. Press the ON control and release
it.
2. Accelerate to the desired speed.
3. Press the SET + control and
release it.
4. Take your foot off the accelerator
pedal.
5. The indicator light
on the instrument cluster will turn on.
Note:
•
Vehicle speed may vary momentarily when driving up and down a
steep hill.
•
If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
•
If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
Disengaging speed control
To disengage the speed control:
•
Depress the brake pedal or clutch pedal (if equipped)
Disengaging the speed control will not erase previous set speed.
Resuming a set speed
Press the RES (resume) control and
release it. This will automatically
return the vehicle to the previously
set speed.
Increasing speed while using speed control
There are three ways to set a higher
speed:
•
Press and hold the SET + control
until you get to the desired
speed, then release the control.
ON
OFF
RES
SET
RES
SET
RES
SET
2008 05+ Mustang
(197)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
67
