Replacing tail/brake/backup lights and turn signal bulbs (wagon)
1. Make sure the headlamp control
is in the OFF position and then
open the hatchback.
2. Using a screwdriver, remove two
screws and gently pull the lamp
assembly away from the vehicle.
3. Remove the socket from the lamp
assembly
4. Pull the bulb straight out of the
socket.
Install in reverse order.
Replacing foglamp bulbs (if equipped)
1. Make sure the headlamp switch is
in the OFF position.
2. Remove the front splash shield
from the bumper.
3. Reach under the front fender, and
remove the bulb socket from the
foglamp by turning
counterclockwise.
4. Disconnect the electrical connector.
Install the new bulb in reverse order.
Replacing side marker bulbs
1. Make sure the headlamp control
is in the OFF position.
2. Remove the front splash shield
from the bumper.
3. Reach under the side of the
bumper, grasp the bulb socket and
turn it counterclockwise to remove
it.
4. Pull the bulb straight out.
Install in reverse order.
2007 Focus
(foc)
Owners Guide (post-2002-fmt)
USA
(fus)
Lights
36