Ford 2006 Mondeo, Руководство пользователя

Страница: 51 / 198

When autowipers is selected, the
wipers will cycle once regardless of
whether the windscreen is wet or dry.
Thereafter, or when the ignition is
switched on with autowipers
selected, the wipers will not cycle
until water is detected on the
windscreen. Alternatively, move the
lever to another position and then
select autowipers, or operate the
washer.
The rain sensor will continuously
measure the amount of water on the
windscreen and adjust the speed of
the front wipers automatically (single
wipe, intermittent, normal or high
speed wiping).
E72173
2
The sensitivity of the rain sensor is
set using the rotary control:
1 = High sensitivity: The wipers will
wipe even if only a small amount of
water is detected on the windscreen.
6 = Low sensitivity: The wipers will
only wipe when a larger amount of
water is detected on the windscreen.
WINDSCREEN WASHERS
E72174
WARNING
Do not operate the washer for
more than 10 seconds at a time,
and never when the reservoir is
empty.
Press the knob at the end of the lever
and hold it to operate the windscreen
washers.
The washer will operate in
conjunction with the wipers. Once
the wash and wipe cycle is
completed, the wipers will pause and
then perform one more wipe to clear
the windscreen.
The windscreen washer switch will
also operate the headlamp washers
when the headlamps are switched
on.
49
Wipers and washers