Ford 2006 Freestyle Скачать руководство пользователя

Страница: 13 / 288

Speed control:

Illuminates when

the speed control is engaged. Turns
off when the speed control system
is disengaged.

Low washer fluid (if equipped):

Illuminates when the windshield
washer fluid is low.

Door ajar (if equipped):

Illuminates when the ignition is in
the ON position and any door or
decklid is open.

Anti-theft system:

Flashes when

the Securilock

娂

Passive Anti-theft

System has been activated.

Throttle Control/Transmission:

Illuminates when a powertrain fault
or an AWD fault (if equipped) has
been detected. Contact your
authorized dealer as soon as possible.

Turn signal:

Illuminates when the

left or right turn signal or the
hazard lights are turned on. If the
indicators flash faster, check for a burned out bulb.

High beams:

Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)

Instrument Cluster

Содержание 2006 Freestyle

































































































































































































































































































Результаты поиска

Содержание 2006 Freestyle

Отзывы:

Похожие инструкции для 2006 Freestyle

Бренды по названию

Популярные бренды

Ford 2006 Freestyle, Руководство пользователя

Результаты поиска

Содержание 2006 Freestyle

Отзывы:

Похожие инструкции для 2006 Freestyle

Бренды по названию

Популярные бренды