The remote entry system allows you to:
•
unlock the vehicle doors without
a key.
•
lock all the vehicle doors without
a key.
•
open the trunk without a key.
•
activate the personal alarm.
•
arm and disarm the perimeter
anti-theft system.
•
operate the illuminated entry
feature.
If there is any potential remote keyless entry problem with your vehicle,
ensure
ALL remote entry transmitters
are taken to your authorized
dealer to aid in troubleshooting.
Locking the doors
1. Press
and release to lock all the doors and activate the anti-theft
system.
Note:
the turn signal lamps will flash once to confirm the doors,
trunk and hood are closed. If any closure is not closed, the turn signals
will
not
flash.
2. Press
and release again within three seconds to confirm that all the
doors, trunk and hood are closed.
Note:
The doors will lock again, and
the horn will chirp once.
If any of the doors, the trunk or the hood are not closed, the horn will
make two quick chirps and the lights will
not
flash until the last closure
is closed.
Unlocking the doors
1. Press
and release to unlock the driver’s door and deactivate the
perimeter alarm (if activated).
Note:
The interior lamps will illuminate.
2. Press
and release again within three seconds to unlock all the
doors.
The remote entry system comes with an illuminated entry feature. This
feature turns on the interior lamps for 25 seconds or until the ignition is
turned to the 4 (RUN) position.
REVIEW COPY
2005 Thunderbird
(tbr)
, Owners Guide (post-2002-fmt)
(own2002)
,
Market:
USA_English
(fus)
Locks and Security
65
