6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.
•
If the oil level is
between the MIN—MAX marks,
the oil level is
acceptable.
DO NOT ADD OIL.
•
If the oil level is below the MIN mark, add enough oil to raise the level
within the MIN—MAX range.
•
2.0L DOHC I4 Zetec engine
•
3.0L DOHC V6 Duratec engine
•
Oil levels above the MAX mark may cause engine damage. Some oil
must be removed from the engine by a service technician.
7. Put the indicator back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to
Checking the engine
oil
in this chapter.
2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
MAX or FULL mark on the engine oil level indicator (dipstick).
4. Install the indicator and ensure it is fully seated.
2004 Escape
(204)
Owners Guide (post-2002-fmt)
USA English
(fus)
Maintenance and Specifications
198
Содержание 2004 ESCAPE
Страница 241: ...3 2 1 2004 Escape 204 Owners Guide post 2002 fmt USA English fus Maintenance and Specifications 241...
Страница 254: ...254...
Страница 255: ...255...
Страница 256: ...256...