•
The gearshift is in P (Park) (automatic
transmission) or the neutral position (manual
transmission).
•
The ignition switch is in the OFF position.
•
All vehicle doors are closed.
•
The driver’s safety belt is unbuckled.
•
The parklamps/headlamps are in OFF position (If
vehicle is equipped with Autolamps, this will not
affect the procedure).
To reduce the risk of injury, do not
deactivate/activate the Belt Minder feature
while driving the vehicle.
BeltMinder activation and deactivation
procedure
1. Turn the ignition switch to the RUN (or ON)
position. (DO NOT START THE ENGINE.)
2. Wait until the safety belt warning light turns off.
(Approximately 1–2 minutes.)
•
Steps 3–5 must be completed within 60 seconds
or the procedure will have to be repeated.
3. Buckle then unbuckle the safety belt three times,
ending with the safety belt unbuckled. This can be
done before or during BeltMinder warning activation.
4. Turn on the parklamps/headlamps, turn off the
parklamps/headlamps.
5. Buckle then unbuckle the safety belt three times,
ending with the safety belt unbuckled.
•
After step 5 the safety belt warning light will be
turned on for three seconds.
6. Within seven seconds of the safety belt warning
light turning off, buckle then unbuckle the safety
belt.
•
This will disable BeltMinder if it is currently
enabled, or enable BeltMinder if it is currently
disabled.
2004 04- Mustang
(mus)
Owners Guide (post-2002-fmt)
USA English
(fus)
Seating and Safety Restraints
79