M-15200K-BRL / BRRL
2021 Bronco Off-Road Roof-Mounted
LED Light Bars
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS
Ford Factory Shop Manual purchase options
www.motorcraftservice.com
Techline 1-800-367-3788
Page 7 of 15
IS M-15200K-BRL 010422
8. Install Rigid 40’’ straight light bar into the roof line bracket slots and secure using fasteners included in the kit. Adjust
light bar aiming as needed, before tightening the fasteners.
PLACE COPY HERE
ROOF LINE BRACKET SLOT
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
LIGHT BAR
ROOF LINE BRACKET SLOT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
9. Install the black rubber end caps over the locknuts on each end of the light bar.
10. Install the light bar covers.
NOTE:
Light bar covers must be installed at all times when driving on roads.
11. Proceed to the wiring section to complete installation.
