Forcepoint V10000, Руководство по модернизации устройства

Страница: 50 / 90

Upgrading V-Series Appliances
46

Upgrading V-Series Appliances
If the Full policy source appliance is down or unavailable
Best practice is to upgrade the
Full policy source
appliance first, then the
User
directory and filtering
, then
Filtering only
appliances, and finally the off-appliance
TRITON components.
However, if your site must upgrade a
User directory and filtering
or
Filtering only
appliance before the
Full policy source
appliance, or if your
Full policy source
appliance is unavailable, is being replaced, or is being re-imaged, then set a
User
directory and filtering
or
Filtering only
appliance (temporarily) to be the Full policy
source. To do this:
1. Back up the Full backup file of the User directory and filtering or Filtering only
appliance in case changing the policy source fails.
2. On that secondary appliance, in the V-Series console, navigate to
Configuration > Web Security Components .
3. For Policy Source , select Full policy source . Save the setting.
4. Upgrade this appliance to the version you want. The appliance automatically
restarts when the upgrade finishes.
After the original
Full policy source
appliance has been upgraded, replaced, or
re-imaged, change the upgraded temporary
Full policy source
machine to point to the
original
Full policy source
again for its policy information. To do this:
1. Upgrade the primary appliance. When the upgrade is done, the appliance
automatically restarts.
2. On the previously upgraded secondary appliance, in the V-Series console,
navigate to Configuration > Web Security Components .
3. For Policy Source , select User directory and filtering or Filtering only and
enter the IP address of the primary appliance. Save the setting.
4. Use the version 8.0.x TRITON installer to upgrade remaining off-appliance
components. See Upgrading Websense Web Protection Solutions for
instructions.
To see all upgrade instructions go to
Upgrading V-Series appliances from v7.8.x to
8.0.x
, page 36 .
Post-upgrade activities
V-Series Appliance Upgrade Guide | Upgrades to v8.0.x
Version 8.0.0 is the first product release to use a new, simplified product naming and
grouping of the familiar Websense TRITON product line.
Original Name New Name
Websense Web Filter Websense Web Filter & Security
Websense Web Security Websense Web Filter & Security