manualshive.com logo in svg

Force Computers PENT/CPCI-721, Руководство по установке

Поделиться
Скачать
Force Computers PENT/CPCI-721 Скачать руководство пользователя страница 65

Installation

Software Upgrades and Accessories

PENT/CPCI-721

2 - 25

Software Upgrades and Accessories

The following software upgrades and accessories are available for the 
PENT/CPCI-721.

BIOS Upgrade Kit

The BIOS upgrade kit contains a DOS-formatted floppy disk with BIOS 
upgrade file and upgrade utilities, e.g. to reflect extended hardware 
support. For installation information, see the README file contained 
on the floppy disk.

NT Driver Kit

The NT driver kit contains a CD-ROM with the Card Executive 2.0 for 
NT PCMCIA driver. For installation information, see the README file 
contained on the CD-ROM.

NT Support Package

The NT support package contains a CD-ROM with Windows NT driv-
ers for extended hardware support (e.g. Ethernet). For installation infor-
mation see the README file contained on the CD-ROM.

Содержание PENT/CPCI-721































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды