EN
137
3
10
13
1
4
8
5
6
7
14
15
2
9
12
11
1
2
1.
2.
1
2
COLLECTION BAG
Connect the two lower units of
the collection bag
13
, then at-
tach the collection bag lid.
Turn the collection bag
13
up-
side down and install the two
collection bag screws.
Using the appliance
Product overview
1
2
1
Safety button
2
Lower on/off trigger
3
Upper locking lever
4
Safety flap
5
Lower locking lever
6
Main handle
7
Battery cover
8
Wheel
9
Handle
10
Upper on/off trigger
11
Upper handle
12
Lower handle
13
Collection bag
14
Height adjustment lever
15
Cutting blade
Caution!
Before start using
the appliance, check the
blades and fastening elements for
damage.
Do not use the appli-
ance if it is damaged.
1.
The appliance is equipped with a
safety switch. In order to switch
the appliance on, press and hold
the safety button
1
, tilt the appli-
ance backwards, pull the on/off
triggers
2
or
10
and release the
safety button
1
.
2.
Keeping the on/off triggers
2
or
10
pulled, wait until the appliance
has reached full speed.
3.
Place both hands on the handle
9
,
return the appliance back to the
ground, and slowly start pushing
the appliance forward.
4.
Start mowing in parallel lines. For
a better result, repeat the process
in a 90° angle.
5.
To switch the appliance off, re-
lease the on/off triggers
2
or
10
.
Wait until the blade has come to a
complete stop before proceeding
with further actions.
LOWER HANDLE
Move the lower handle
12
to an
upright position and close the
lower locking lever
5
.
Caution!
Never use the appliance with open locking levers.
UPPER HANDLE
Install the upper handle
11
to
the lower handle
12
as shown,
using the upper locking lever
3
assembly.
1
2
Adjustments