FOR-A VSF-128128, Руководство по эксплуатации

Страница: 96 / 106

84
10-4. Video Crosspoint Card (VSF-X6432)
10-4-1. Setting and Checks
Before installing the video crosspoint card, check that the LEDs and DIP switches on the
expansion video crosspoint card are set as shown below.
(1) Siganl Detection LED
Signal detection LEDs are aligned ch 1 to 32 from viewer's lefts. When a video signal is
detected, the LED for the corresponding input channel turns on.
(2) Dip switch (Piano type)
Dip switches can be viewed as figure right. (All Dip
switches are preset OFF at the factory before shipping.
□
indicates the switch position. (Do not change.)
(3) Power indication LED
When DC +12 V, DC +5 V, or DC -5 V power is supplied,
the corresponding power indicator turns on.
(1)Signal detection
LED 1
～
32
(3)Power indication
LED
(2)Dip switch
Front
OUT
02
OUT
03
OUT
04
OUT
05
OUT
06
OUT
01
OUT
07
OUT
08
OUT
30
OUT
31
OUT
32
…………
OUT
10
OUT
11
OUT
12
OUT
13
OUT
14
OUT
09
OUT
15
OUT
16
＜
VSF-X6432
＞
1 2 3 4 ON
Switch
-5V +5V
+12V