FOR-A USF-212PS, Руководство по эксплуатации, Страница: 30 / 40

30
10-4. SNMP Tab
Clicking SNMP Tab opens the following page on the web browser.
Clicking
also opens the same page.
IMPORTANT
In order to confirm changes in SNMP Tab, click Apply to restart the USF-212S.

SNMP Settings
This page allows you to apply various settings to monitor USF-212S by SNMP manager.

SNMP System Settings
Item Number of Characters Description
sysName Under 31 Characters
Name of unit
sysContact Under 31 Characters
Administrator comments
sysLocation
Under 31 Characters
Details on installation location

Downloading of MIB (Management Information Base) file.
The MIB file can be downloaded according to the following procedure.
1.
Click Download MIB File.
2. Click Save of FORA-USF-212S-MIB.zip file.
3. Unzip the file and load it to SNMP Manager.

Community Settings
Item Number of Characters Description
Read Only1-2
Under 31 Characters Read only community name of SNMP.
Read/Write1-2
Under 31 Characters Read and write community name of SNMP.
Trap Address 1-3
---
IP address of SNMP manager to which SNMP
trap is sent.
Trap Community
1-3
Under 31 Characters Community name to send trap to Trap 1
Address.
Trap1 Address ---
IP address of SNMP manager to which SNMP
trap is sent.
Apply -
Applies setting change of SNMP System or
Community Settings.
The applied settings appear in the right columns
when they are applied.