FOR-A USF-212PS, Руководство по эксплуатации, Страница: 25 / 40

25
10. USF-212S Web GUI
Module status web browser display settings are different between LAN1, 2 and LAN A.

Displaying the web browser from LAN 1 and LAN 2
Open the web browser on the PC connected to LAN 1 and LAN 2, then input the address
http://192.168.0.10/ (factory default setting). The status of USF-212S is displayed on the web
browser.

Displaying the web browser from LAN A
Open the web browser on the PC connected to LAN A, then input the address
http://172.16.0.10/ (factory default setting). The status window of USF-212S is displayed on
the web browser.
10-1. Status Tab
Clicking the Status tab opens a window as shown below.
Clicking Refresh allows you to update the window contents.
The modules mounted in slots 1 to 12 and associated slot names
are indicated.
Modules whose connection is lost are indicated in gray. Clicking
on a mounted module (slot 1 to 12) displays its setting window in
the right side of the Web GUI.
Clicking on
changes the window to USF-212S Status
Tab.
Clicking on
makes the module list window (slots 1 to 12)
disappear and a full screen window appear.
Clicking on
makes the module list (slots 1 to 12) reappear.
Refer to the respective module operation manual for details on
module window settings on Web GUI.