9
Downloading MIB files
(1) Click
to download the MIB (Management Information Base) for your
SNMP manager.
(2) Select
Save
(S) from the opened dialog box.
(3) FORA-USF111DDA12G-MIB.zip File is downloaded.
(4) Unzip the file and load it into your SNMP manager.
4-2. syslog Functions
The USF-111DDA-12G supports log monitoring and message transmission using syslog protocol.
Clicking the syslog tab opens a window shown as below.
Item
Description
Send Syslog
Select
Enable
to send syslog messages to the management terminal.
Send Address
Check the IP address to send syslog messages. The IP address is the
same as the SNMP trap address. Refer to the USF-212AS/USF-105AS
Operation Manual for details on setting the SNMP trap address.
Facility
Sets syslog logging facilities in Local 0 through Local 7.
Header Message
Sets syslog header messages up to a maximum of 63 alphanumeric
characters.
Factory setting: USF-111DDA-12G
Input Video Detect
Sets detection messages for video input into USF-111DDA-12G.
Maximum of 63 alphanumeric characters. Sets priority in 9 steps.
Factory setting:
Notice
Input Video Loss
Sets detection messages for video input into USF-111DDA-12G being
lost. Maximum of 63 alphanumeric characters. Sets priority in 9 steps.
Factory setting:
Warning
*
Click
Apply
when settings are changed.
