49
A message when CRLF is not received within the given time (10 seconds).
Dynamic Range CONV,DC,EOTF DeGamma,0
Slave Response: ERR99CRLF
7-5-5. Slave Status Report Messages
The Slave unit monitors setting change from other than the Master unit in 500msec to
1000msec intervals. When settings are changed, the Slave status is sent out to the Master in
UDP.
Slave Status Messages
Status1, Device,RPT,Setting2, Setting3, Setting4, Setting2,
･････
Setting24 ,
Input1-1, Input1-2, Input1-3, Input1-4, Input1-5, Input2-1, Input2-2, Input2-3, Input2-4, Input2-5,
Output1-1, Output1-2, Output1-3, Output1-4, Output1-5, Output2-1, Output2-2, Output2-3, Output2-4,
Output2-5, CRLF
*
Settings 2-24 in Sec. 7-5-2
. “Command List - Master to Slave” are applied to Settings 2 to
24. Settings 8 and 9, not settable items, fixed 0 is sent out.
The Master sends out ACK CRLF (UDP) on receipt of a message.
If ACK CRLF is not sent out from the Master, the Slave resends the same message at
1-second intervals for 3 times before starting time-out process.
*
Input/output video format values are sent out for Input1-1 to 2-5 and Output1-1 to 2-5.
Input 1-1 to Input 1-5
USF-106UDC/DC-12G: Input video signal value is sent out.
Input 2-1 to Input 2-5
USF-106UDC/DC-12G: Second input port is not supplied so None (-1) is applied to all of
2-1 to 2-5
Output 1-1 to Output 1-5
USF-106UDC/DC-12G: Output video signal value is sent out.
Output 2-1 to Output 2-5
USF-106UDC/DC-12G: Second output is not supplied so None (-1) is applied to all of 2-1
to 2-5.
7-5-5-1. Video Input/Output Signal Format
Input 1-1, Input 2-1, Output 1-1, Output 2-1 Values
Item
Value Range
Description
Input 1-1
Input 2-1
Output 1-1
Output 2-1
Values
-1: none
0: Not Used
1: 525
2: 625
3: 720
4: 1080
5: 2160(12G)
6: 2160(3Gx4)
Line number of the input/output video signal format.
* Unsupported video formats are included.