26
10-3. Network Tab
Clicking the
Network
tab opens a window as shown below.
IMPORTANT
Setting changes performed in the Network Tab require the USF-105S to be restarted after they
are entered by clicking
Apply
.
WAN Settings
Network settings of WAN side (LAN A) port are set.
Item
Factory Setting
Description
IP Address
172.16.0.10
Sets the external LAN A IP Address.
Subnet Mask
255.255.0.0
Sets the external LAN A Subnet Mask.
Default Gateway
0.0.0.0
Sets the external LAN A Default Gateway.
HTTP Base Port
55000
Sets the TCP/UDP port number through which the
WebGUI accesses to the external LAN A.
SNMP Base Port
56000
Sets the TCP/UDP port number through which the
SNMP Manager accesses to the external LAN A.
Control Base Port
57000
Sets the TCP/UDP port number through which
Remote Control Unit made by FOR-A accesses to
the external LAN A.
Example 1: To Display Slot 1 Module on the Web Browser by Addressing.
When the HTTP Base Port setting is 55000, input http://172.16.0.10:55001/ in the address bar
of the web browser to display the Slot 1 module WebGUI.
Similarly, input http://172.16.0.10:55002/ for Slot 2.
Example 2: To Get/Set Slot 1 Module via SNMP Manager
When SNMP Base Port setting is 56000, input 172.16.0.10 for the IP address. Input 56001 for
the SNMP port number.
Similarly, input 56002 for the port number of Slot 2.
Input values to change settings. The
changes are applied by clicking
Apply
.
Set values are indicated.
