6
2. Panel Descriptions
2-1. Front Panel
No.
Name
Description
(1)
OPERATE LED
Lights green when power is supplied by USF frame.
(2)
270Mb/s LED *1
Lights green when input SDI signal is 270M b/s.
(3)
DIP Switch
Sets input signal switching.
(4)
1.5Gb/s LED *1
Lights green when input SDI signal is 1.5G b/s.
(5)
3.0Gb/s LED *1
Lights green when input SDI signal is 3G b/s.
(6)
USB connector
Used to upgrade USF-1053DDA software.
(Do not connect USB devices.)
*1 When video signals routed from USF frame internal bus are distributed, video signal bit rate detection is
not available. All the LEDs; 270Mb/s, 1.5Gb/s, and 3.0Gb/s are turned off.
Refer to Sec. 4
“USF-1053DDA I/O via USF-212S/AS Internal Bus” for switching the video
signal source.
2-2. Rear Panel
Name
Description
SDI IN
SDI signal input.
Accepts an SD/HD/3G-SDI signal.
SDI OUT 1 - 5
SDI signal outputs.
Distributes the SDI IN input to 5 outputs.
SDI IN
1
2
3
4
5
SDI OUT
USF-1053DDA
(2)
(3)
(4)
(5)
(1)
(6)
USF-1053DDA
