16
5-5-4. Signal Input Status
Parameter
Description
SDI Status
Displays SDI input signal status.
Normal:
Normal input is detected.
Lock Error:
No input or SDI lock error is detected.
CRC Error:
No input or CRC error is detected.
Loss:
SDI signal is lost.
Video Format
Displays video format of SDI input signal.
Loss:
SDI signal is lost.
5-5-5. LTC Input
Parameter
Description
SDI
AES
Displays LTC input signal detection.
Detected:
LTC signal is detected.
Loss:
LTC signal is not detected.
5-5-6. Module Status
Parameter
Description
Slot
Slot no. of USF-212S on which the module is installed.
S/N
Serial no. of USF-1013MUX
Install Cards
Indicates whether or not the front and rear modules match.
Matched:
Correct (front/rear) modules are installed.
Mismatched:
Incorrect rear module is installed. Install correct rear
module.
Soft Version
Software version of USF-1013MUX
FPGA Version
FPGA version of USF-1013MUX
IP Address
Assigned IP address
Subnet Mask
Assigned subnet mask
Default Gateway
Assigned default gateway address
MAC Address
Displays the MAC address
MicroSD Card
Indicates whether or not a microSD card is installed.
No Detected:
Not installed.
Detected:
Installed.
5-6. SNMP Settings
Click
SNMP
.
