10
5. Conversion Examples
5-1. SD to HD (without Genlock)
This operation example shows how to convert SD-SDI video to HD-SDI video without using a
genlock signal. The 4:3 SD video is converted to 16:9 HD video by
horizontally filling
a 16:9
screen.
Connection
1) Connect the OSD OUT port to NTSC (PAL) monitor.
2) Input an SD-SDI signal to the [INPUT-3G/HD/SD] port.
3) Connect the [OUTPUT-3G/HD/SD 1] port or [OUTPUT-3G/HD/SD 2] port to a waveform
monitor or an SDI monitor.
4) Power on the UFM frame.
Coversion Setting
1) Press the MENU OSD button to display the menu on the NTSC (PAL) monitor.
2) Make settings as shown in the table below. See section 4-2. "Menu Operation" for details on
menu operation.
Menu
Item
Setting
Description
Input
Source
SDI
Selects
SDI
for input port. The video format is
automatically set.
Output
Output
720P, 1080i
Selects
1080i
or
720P
for output video format.
Genlock
Free run
Sets reference mode to
Free run
.
Scaling
(*1)
SD in format
Normal 4:3
Specifies aspect ratio of input to
4:3
.
ARC mode
Normal
If set to
Normal
, the aspect ratio of the video is
preserved, the right and left edges are fitted and
the top and bottom regions are cut off. See section
6-1. "Up-conversion (SD to HD)".
UFM-30UDC
OUTPUT
INPUT
COMPOSITE
3G/HD/SD-SDI
3G/HD/SD-SDI 1
3G/HD/SD-SDI 2 SDI MONITOR
OSD OUT
Input (SD-SDI
）
Out 2 (HD-SDI)
Out 1 (HD-SDI)
Menu display
Preview Out (HD-SDI)
4:3
Содержание UFM-30UDC
Страница 1: ...UFM 30UDC Digital Up Down Cross Converter 2nd Edition OPERATION MANUAL...
Страница 6: ......
