FOR-A UFM-30MUX, Руководство по эксплуатации

Страница: 28 / 42

28
6-5-3. TV SYSTEM
Parameter Default Description
Format 1080/59i
Sets the SDI TV standard. (See the SDI LOCK MODE
parameter described above.)
See the table below for available formats.
Format settings
3G SDI HD SDI SD SDI
1080/59a
1080/50a
1080/60a
1080/59b
1080/50b
1080/60b
a: Level A
b: Level B
1080/59i
1080/50i
1080/60i
1080/30p
1080/29p
1080/25p
1080/24p
1080/23p
1080/24s
1080/23s 720/59p
720/50p
720/60p
720/24p
720/23p
1035/59i
1035/60i
s: PsF
525/60
625/50
6-5-4. MINIMUM DELAY
Parameter Default Description
MIN DLY Off On Sets the SDI I/O delay time to minimum (within 4
μsec). But audio channel mapping is unavailable.
(See section 7-3 "MINIMUM DELAY.")
Off Sets the SDI I/O delay time to normal (1H). Audio
channel mapping is available.
6-5-5. REF LEVEL
Parameter Default Description
REF LVL -20dB
Selects the digital audio reference level. (See section 8-2."
Digital Output Level versus Analog Input Level.")
-20dB
-18dB
6-5-6. TEST MODE
Parameter Default Description
Test SIG Off Setting to ON outputs an audio test signal.
On Outputs an internally generated 1 kHz audio test
signal (by embedding into SDI signals).
Off Outputs the selected input audio.
6-5-7. FACTORY SET
Parameter Execution Description
FACT SET EXEC Allows you to reset all parameters to factory values.
To reset all parameters,
press the control or move the
Up/Down switch to Up while EXEC is displayed.
USO
RESTRITO