FOR-A UFM-30MUX, Руководство по эксплуатации

Страница: 27 / 42

27
6-4. LTC Menu
See section 7-2. "TIME CODE Processing" for details on time code processing.
6-4-1. LTC MUX
Parameter Default Description
LTC MUX Through Passes through or changes ANC time code data in the SDI
output.
Through Passes through ANC data in SDI input without
modification.
MUX Overwrites ANC data with the LTC selected under
LTC SEL below.
6-4-2. LTC SEL
Parameter Default Description
LTC SEL AES Selects LTC (time code) data to be embedded into the SDI
output.
AES Uses the time code data of AES CH7/8 input for
SDI output.
Analog Uses the time code data input from the
UFM-30MUX AI for SDI output.
* Time code input for AES CH7/8 can be selected on the front panel. (See section 2-1.
UFM-30MUX.)
6-5. System Menu
6-5-1. SDI BYPASS
Parameter Default Description
SDI BYPS Operate Selects whether the SDI input is processed or bypassed when
powered On.
Basically, the SDI input signal is directly sent to the SDI output
via relay when powered Off.
Operate Processes and sends the SDI input signal to the
SDI output.
Bypass Directly sends the SDI input to the SDI output via
relay.
6-5-2. SDI LOCK MODE
Parameter Default Description
SDI Lock Auto Selects the Auto Detect or Specified TV standard for SDI
signals.
Auto Automatically detects and sets the SDI TV
standard. If the SDI input signal is abnormal, the
standard set under
Format (see the next
parameter) is applied.
Internal Forcibly applies the TV standard set under Format
to SDI signals.
USO
RESTRITO