FOR-A MV-1200, Руководство по установке

Страница: 7 / 18

7
2. Installation of Optional Cards
Save the MV-1200 Series settings before starting optional card installation. Refer to Layout Manager
Operation Manual Sec. 4-
2. “Saving/Loading Setting Files.”
IMPORTANT
Note that optional cards and power supply installation should be performed by qualified technical
personnel familiar with FOR-A equipment. Do not touch any parts of the card with your hands to
prevent damage caused by static electricity. Power OFF all connected units / disconnect power cords
prior to accessing any part of the interior.
An MV-1200Series card may obstruct other card installation if installed in improper order.
Install multiple optional cards in the following order.
OUTPUT SLOT fans (MV-12SDO / 12PCO) -- MV-12PS -- MV12SDO / 12PCO -- MV-12SDI / 12PCI /
12IF.
Step-by-Step Guide
2-1. MV-12SDI / 12PCI / 12IF
Follow the procedure described below for MV-12SDI, MV-12PCI, and MV-12IF units.
Installable slots are INPUT SLOT A, INPUT SLOT B, or IF SLOT.
1. Turn the power off and confirm that the power cord is disconnected. Detach the top panel
following the procedure described as below.
a. Detach all top panel fastening screws. See the figure below.
6 pcs.
M3x6
Binding Head
4 pcs.
M4x8
Binding Head