FOR-A MFR-1000, Руководство по эксплуатации

Страница: 13 / 38

13
D SERIAL1 to 4
Used for serial interface control. The default setting is
RS-422. RS-232C is also selectable using switches on the
internal card.
► See Sec. 2-3-4. “Card Switches” for details.
E
GPI 1
(Port no.: 1)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
F
GPI 2
(Port no.: 2)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
G
GPI 3
(Port no.: 3)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
H
GPI 4
(Port no.: 4)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
*1 The MFR-LAN connector may be labeled 10/100BASE-T on the previous model.
2-3-3. Interfaces

GPI IN / TALLY OUT Connector (37-pin D-sub, female)
Pin No. Signal Pin No. Signal
1 GPI_IN / TALLY_OUT 01 # 20 GPI_IN / TALLY_OUT 20 #
2 GPI_IN / TALLY_OUT 02 # 21 GPI_IN / TALLY_OUT 21 #
3 GPI_IN / TALLY_OUT 03 # 22 GPI_IN / TALLY_OUT 22 #
4 GPI_IN / TALLY_OUT 04 # 23 GPI_IN / TALLY_OUT 23 #
5 GPI_IN / TALLY_OUT 05 # 24 GPI_IN / TALLY_OUT 24 #
6 GPI_IN / TALLY_OUT 06 # 25 GPI_IN / TALLY_OUT 25 #
7 GPI_IN / TALLY_OUT 07 # 26 GPI_IN / TALLY_OUT 26 #
8 GPI_IN / TALLY_OUT 08 # 27 GPI_IN / TALLY_OUT 27 #
9 GPI_IN / TALLY_OUT 09 # 28 GPI_IN / TALLY_OUT 28 #
10 GPI_IN / TALLY_OUT 10 # 29 GPI_IN / TALLY_OUT 29 #
11 GPI_IN / TALLY_OUT 11 # 30 GPI_IN / TALLY_OUT 30 #
12 GPI_IN / TALLY_OUT 12 # 31 GPI_IN / TALLY_OUT 31 #
13 GPI_IN / TALLY_OUT 13 # 32 GPI_IN / TALLY_OUT 32 #
14 GPI_IN / TALLY_OUT 14 # 33 Frame ground
15 GPI_IN / TALLY_OUT 15 # 34 Frame ground
16 GPI_IN / TALLY_OUT 16 # 35 Frame ground
17 GPI_IN / TALLY_OUT 17 # 36 +4.8V output
18 GPI_IN / TALLY_OUT 18 # 37 +4.8V output
19 GPI_IN / TALLY_OUT 19 #
* The symbol "#" at the end of signals represents the port number (1, 2, 3 or 4).
* The maximum total output current for all +4.8 V outputs is 1.5 A.