FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 49 / 236

49
6-3. Clean Set Up
The switcher can output CLEAN video (background video of the program signal) via an auxiliary
output. Users can also add KEY or DSK images to CLEAN. Follow the procedure below to
assign the clean video to an AUX output. AUX3 is used in this example.
Outputting the Clean Video from AUX 3
(1) Double-press AUX1 to display the [SETUP - OUTPUT- OUT XPT](1/3) menu.
(2) Turn F1 to select AUX3.
(3) Turn F2 to select CLN.
OUTPUT :SELECT : XPT : TRANS RATE : 1/3
OUT XPT : =
AUX3 : = CLN :En=OFF =0 :
Displaying KEY1-2 and DSK1-2 Images on the Clean Video
(1) Double-press CLEAN to display the [SETUP - OUTPUT - CLN/PREV] (1/2) menu.
(2) Turn F1 to set KEY1 to ON. Then press F1 to confirm the setting.
(3) Set KEY2 and DSK1-2 in the same way.
OUTPUT : KEY1 : KEY2 : DSK1 : DSK2 : 1/2
M/E CLN : =
ON : = ON : = ON : = ON :
6-4. KEY OUT Set Up
The KEY OUT signal, switcher processed key cut signal (alpha channel), can be assigned to
AUX outputs. Various kinds of key cut signals can be used for KEY OUT sources.
(1) Open [SETUP - OUTPUT - OUT XPT] menu PAGE 2.
OUTPUT :M/E KEY: : AUX INHIBIT : 2/3
OUT XPT : =
MEKEY : :S=AUX1 En=OFF :
(3) Turn F1 to select a KEY OUT signal. Various types of KEY OUT signals are available as
shown in the table below. Press F1 or ENTER to confirm the setting.
Item Setting Description
M/E
KEY
PGM
Key signal of PGM when using DVE
PST
Key signal of PST when using DVE
ME A
Key signal of M/E-A when using DVE
ME B
Key signal of M/E-B when using DVE
KEY1, KEY2 Key signal of each KEY1 or KEY2
DSK1, DSK2 Key signal of each DSK1 or DSK2
MEKEY Key signal of program including KEY1-2 and DSK1-2