FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 37 / 236

37
5. Video Sources
5-1. How to Assign User Names to Sources
Video inputs, Still1-2, StillKey1-2, Matte, Black and Color bar can be assigned user-specific
names, to make them easier to identify for operators. User names can be given to input signals,
internally generated black mattes and matte signals, and still pictures. Follow the procedure
below to name a signal source.
(1) Press MENU in the SELECT/KEYPAD block, then press SETUP to display the SETUP menu
top page.
(2) Turn F1 to select INPUT. Then press F1 or the page down button to display the [SETUP -
INPUT] menu.
(3) Turn F1 to select RENAME. Press F1 or the page down button to display the [SETUP -
INPUT - RENAME] menu.
SETUP :>SIGNAL >PROC AMP> RENAME >ASSIGN
INPUT :>COLORBAR
(4) Turn F1 to select a signal under
SELECT . (See the table below.)
INPUT :SELECT :SHORT : LONG NAME(MV) : 1/1
RENAME : =IN04 : =IN04 : =INPUT04 :
SELECT
SHORT
default setting LONG NAME
default setting
(*1)
Signal description
BLACK BLAK BLACK Black signal
XT100 IN01 to IN08 IN01 to IN08 INPUT01 to INPUT08
SDI video input to rear
connectors 1-8
XT110 IN01 to IN12 IN01 to IN12 INPUT01 to INPUT12
SDI video input to rear
connectors 1-12
STILL1, STILL2 STL1, STL 2 STILL1, STILL2 Still images 1-2
STILK1, STILK2 STK1, STK2
STILLKEY1,
STILLKEY2 Still KEYOUT (alpha
channel) images1 -2
CKFIL CKFL CK FILL Chromakey fill signal
CKKEY CKKY CK KEY Chromakey key signal
MATT1, MATT2 MAT1, MAT2 MATTE1, MATTE2 BUS matte color 1 and 2
SBEF1, SBEF2 EFF1, EFF2
SUB EFF1, SUB
EFF2
Sub effect channels
CLBAR CLBR COLOR BAR Color bar
(*1) Long names are used for titles displayed on the multiviewer screen.
(5) To change the short name of a signal, use F2 to assign a name up to 4 characters in length,
entering the characters one by one. First, press F2 to highlight a character. When the latter is
highlighted, turn F2 to change it. Alphanumeric characters and symbols (ASCII characters)
can be used for names.
(6) To change the long name of a signal, use F3 to assign a name up to 8 characters in length,
entering the characters one by one. First, press F3 to highlight a character. When the latter is
highlighted, turn F3 to change it. Alphanumeric characters and symbols (ASCII characters)
can be used for names.