FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 145 / 236

145
16-3. Macro Memory Operation
16-3-1. Overwrite Protection
(1) Press MACRO in the SELECT/KEYPAD block to display the [MACRO MEMORY] menu.
(2) Turn F1 to select a memory page. Set
DIRECT to OFF, if it is ON.
MACRO : PAGE :DIRECT :PAGECLR: : 1/3
MEMORY : =
0 : = OFF : >CRNT : :
(3) Press a macro number button on the keypad. The [MACRO RECALL] menu will appear.
(4) Turn F1 to select DISABLE to set write protection on the number button.
MACRO :OVER WR:DELETE : NAME = MCR01 : 1/1
RECALL : =
DSBLE : >OFF : STEP = 60 :
16-3-2. Naming Macros
Macros are named as MCR 00 to MCR 29 by default. Names for registered macros can be
changed using the menu as shown below. Up to 6 characters are available.
(1) Press MACRO in the SELECT/KEYPAD block to display the [MACRO MEMORY] menu
and press the page down button to go to PAGE 2.
(2) Turn F1 to select a macro number button.
MACRO :SELECT :NAME : : 2/3
MEMORY : =
12 : =MCR12: :
(3) Press F2 to move to the target character. ("R" in the example below.)
(4) Once the character is displayed in reverse video, turn F2 to select a new character. ("0" is
selected instead of "R" in the example below.) Alphanumeric characters and symbols are
available.
(5) Press F2 to confirm the selection.
:NAME : :NAME : :NAME :
: = M CR12: : =MC R 12: : =MC 0 12:
(6) Repeat Step (3) to (5) to change the macro name.
Page No. Button No.