FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 123 / 236

123
13. Multiviewer
The multiviewer function allows users to monitor multiple images such as video sources input to the
switcher and internally generated or combined images on the same screen. The HVS-XT100 series
switcher provides one channel output in 2/4/5/7/9/10/11/16 split screen formats. In addition, up to 8
layout patterns including video mapping can be saved and recalled.Video titles and on-air tally
information can also be displayed. Note that the multiviewer outputs are delayed by one frame
relative to the program output.
The setup procedure for the multiviewer is as follows
：
1. Assign a multiviewer video to an output bus.
2. Select a split-screen type.
3. Video Signal Mapping
4. Add titles, audio level meters, safety area markers, on-air tallies and frame borders.
This chapter uses AUX2, 4-way screen, PGM, PREV, IN01 and IN02 display as examples.
13-1. Assigning the Multiviewer to an Output Bus
The multiviewer image can be assigned to any output bus (AUX1-8 and HDMI).
There are two methods for multiviewer image assignment: using the buttons above the
KEY/AUX bus or using the menu.
Let's output the Multiviewer image from AUX2.

Using the Buttons above the KEY/AUX bus
(1) Press AUX2.
(2) Press MV in the KEY/AUX bus.

Using the Menu
(1) Double-press AUX2 above the KEY/AUX bus.
(2) The [SETUP - OUTPUT- OUT XPT] menu opens. Turn F2 to select MV.
OUTPUT :SELECT : XPT : TRANS RATE : 1/3
OUT XPT : =
AUX2 : = MV :En=OFF =0 :
13-2. Selecting the Split-screen Type
Eight screen layout patterns can be selected using the [SETUP - OUTPUT - MV] menu.
(1) Double-press MV in the KEY/AUX bus block to display the [SETUP - OUTPUT- MV] menu.
(2) Turn F1 to select 4 in this example.
OUTPUT : DIV : : USER PRESET : 1/7
MV : = 4 : : =OFF >LOAD :
1 1 1
1
2 2 2 3 4
2 3 4 5 6 7 8 9 10 11 12
KEYER DSK AUX
KEY/AUX
PGM PREV CL EAN MV