FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 107 / 236

107
12-1-3. Backing-up Stills

To Save Still Images:
(1) Press MENU, then STILL in the SELECT/KEYPAD block to display the menu
(2) Press page down to go to PAGE 2.
(3) Turn F1 to select STIL1 or STIL2 to be backed up.
(4) Turn F2 to select SAVE>.
(5) Turn F3 to select a memory number from MEM1 to MEM4.
(6) Press F2 to save the still to the selected memory number. The backed up stills are
preserved after powering off the switcher.
STILL :STILL : FUNC :MEMORY :RESUME : 2/5
BACKUP : =
STIL1 : SAVE> : = MEM1 : =MEM1 :

To Load Saved Still Images to Still Memory Manually:
(1) Open PAGE 2 of the [STILL] menu.
(2) Turn F1 to select STIL1 or STIL2 to be loaded.
(3) Turn F2 to select <LOAD.
(4) Turn F3 to select the memory number where the desired still image is stored.
(5) Press F2 to load the still from the memory buffer.
STILL :STILL : FUNC :MEMORY :RESUME : 2/5
BACKUP : =
STIL1 : <LOAD : = MEM1 : =MEM1 :

To Load Saved Still Images to Still Memory Automatically:
(1) Open PAGE 2 of the [STILL] menu.
(2) Turn F1 to select the desired still.
(3) Turn F4 to select the memory number where the desired still image is stored. The still
images will then automatically load at startup.
STILL :STILL : FUNC :MEMORY :RESUME : 2/5
BACKUP : =
STL1 : <LOAD : =MEM1 : = MEM1 :
Turn RESUME OFF if you do not wish to recall any data to stills at startup.
STILL :STILL : FUNC :MEMORY :RESUME : 2/5
BACKUP : =
STL1 : <LOAD : =MEM1 : = OFF :