FOR-A HVS-300HS, Руководство по эксплуатации

Страница: 34 / 114

24
7-3. Resize Function
A resize function is provided for every input (including optional inputs). This allows users to input
SD signals at the same frame-rate
as HD mode
and use them as HD images by upsizing. To
use the Resize function, proceed as follows.
(1) Press the MENU button and then press the 7/SETUP button to display the SETUP menu’s
top page.
(2) Turn F1 to select INPUT. Press F1 or the PAGE DOWN button to display the [SETUP –
INPUT] menu.
SETUP :>SYSTEM >INPUT >OUTPUT >PANEL
MENU :>EXT I/F >STATUS
(3) Turn F1 to select SIGNAL. Press F1 or the PAGE DOWN button to display the [SETUP –
INPUT - SIGNAL] menu.
SETUP :> SIGNAL >PROC AMP>RENAME >ASSIGN
INPUT :
(4) Turn F1 to select an input signal for resizing.
(5) Turn F2 to set SDSDI for
FORMAT
.
(6) Turn F3 to select an aspect ratio under the
RESIZE
item.
INPUT :SELECT :FORMAT :RESIZE : FS : 1/1
SIGNAL : =IN04 : =
SDSDI : =4:3 : =ON :
IMPORTANT
The Resize function is automatically enabled when SD signals are input to the
switcher in HD mode, and FORMAT in the [SYSTEM-INPUT- SIGNAL] menu is set to
SDSDI. ((Please make sure the Resize function stays disabled if HDSDI is set for
FORMAT.)
7-4. Frame Synchronizer
A video frame synchronizer is provided for every input (this includes optional inputs). It is used to
synchronize asynchronous signals. Users can select whether frame synchronizing is applied to
input signals or not (for each of them) as shown in the procedure below.
(1) Display the [SETUP - INPUT - SIGNAL] menu.
(2) Turn F1 to select an input signal for use.
(3) Turn F4 to set
FS
to ON and activate the frame synchronizer.
INPUT :SELECT :FORMAT :RESIZE : FS : 1/1
SIGNAL : =IN02 : =AUTO : =16:9 : =
ON :