25
5-3. CONNECT STATE
Connections with FA-9500/FA-9520 units can be checked in the CONNECT STATE menu.
C O N N E C T S T A T E
8 0 3
I P : 1 9 2 . 1 6 8 . 0 . 1 0
S T A T E : C O N N E C T E D
I D : F A - 9 5 0 0
M U : F A - 9 5 0 0
Item
Description
IP
Shows the IP address of the connected FA-9500/FA-9520.
STATE
DISCONNECT
: Connection is disabled.
CONNECTED
: The FA-9500/FA-9520 of the selected IP address is connected.
NO CONNECTION
: Connection with the selected FA-9500/FA-9520 could not
be established.
OVERLIMIT
: A maximum 5 FA-9500/FA-9520 units are already connected. No
more units can be connected.
ID
Shows the unit name assigned in Unit ID Assignment (section 8-4).
NO NAME is indicated if a unit name is not assigned.
MU
Shows the unit name assigned by and in the FA-9500/FA-9520 itself.
*1
“MU IS LOCAL MODE” indicates that the connected FA-9500/FA-9520 is set to
LOCAL MODE.
The FA-95RU cannot control the FA-9500/FA-9520 that is set to LOCAL mode.
To enable control, set the FA-9500/FA-9520 to REMOTE mode.
*2
*1 See
“Utility Settings” [Set Event Name] in the FA-9500/FA-9520 Operation Manual for
details on name assignments.
*2 See
“CONTROL SETTING” in the FA-9500/FA-9520 Operation Manual for details on
LOCAL/REMOTE settings.
Menu button
MU
SELECT
