FOR-A FA-10DCCRU, Руководство по эксплуатации

Страница: 59 / 300

43
5-5-4-1. Manual Level Adjustment
The FA-9500 automatically adjusts the signal level if the MODE of the AVO SETTING
menu is set to AUTO (see section 5-5-1). The signal level can also be manually adjusted if
the MODE is set to HOLD or OFF.
 To provide fine adjustment on the automatically adjusted level
Changing the AVO MODE selection from AUTO to HOLD will enable fine adjustment of the
adjusted signal levels that are provided by the automatic level adjustment. However, the
change will not be retained after restarting the unit. The signal levels return to the values
before the manual adjustment (the values provided by the automatic level adjustment).
While AVO is turned on, the COLOR CORRECT menu settings will automatically adjust.
MODE will change to BALANCE, and CURVE to BLACK. The fine adjustment enabled in
HOLD mode is enabled only for color correction BALANCE mode.
 To manually adjust the signal levels
Set AVO MODE to OFF to manually adjust the signal levels. If the AVO MODE selection is
changed from AUTO to OFF, the signal levels return to their values before the automatic
level adjustment.
The adjustable items in the Color Correction menus are as shown in the table below.
AVO MODE selection
Color Corrector Menu Reference
AUTO HOLD OFF
× ○ ○
WHITE LEVEL 5-2-1 WHITE LEVEL
× ○ ○ BLACK LEVEL 5-2-2 BLACK LEVEL
× ○ ○ GAMMA LEVEL 5-2-3 GAMMA LEVEL
× × ○
CORRECTION MODE /CURVE 5-2-4 COLOR CORRECT
○ : The setting is enabled.
× : The setting is disabled.
The message "NOT ADJUST" appears when the disabled menu is opened.