FOR-A FA-10DCCRU, Руководство по эксплуатации

Страница: 225 / 300

209
9-6-1. Event Control
Parameter Default
Setting range
(Steps)
Description
Start Up
Event Load
Last Setting
Last Setting
Video Format
*1
Default
*2
Event1 to Event100
Selects an event you want to load
at startup.
Auto Event Load Disable
Disable
Enable
Enable : Loads the settings of the
respective video formats. If the
video input is changed to a
different format, the settings of the
changed format will be loaded.
Event Load Default
Video Format
*1
Default
*2
Event1 to EVENT100
Selects the number of an event
you want to load. Click Submit to
load.
Event Save Video Format
Video Format
*1
Event1 to Event100
Selects the number of an event
you want to save. Click Submit to
save.
*1 Video Format selects an event that is stored for each video format.
*2 Default recalls the default settings.
 Set Event Name
Click Set next to Set Event Name. A window that allows you to name the FA-9500 and events
1 though 100 as shown below opens.
 Unit Name
Enter a name for the FA-9500 within 15 characters. The name will be displayed on the front
panel under NAME in the NETWORK INFO menu (7-4). The factory default is FA-9500.
 Event Name
Enter a name in the setting box next to respective events within 15 characters.
Select which events to be displayed by clicking on the event groups in section (1) at the top of
the page. Events are displayed by groups of 20.
After completing the settings, click Submit.
The factory default values are EVENT 1 to 100.
The entered event names will be displayed when performing Event Load or Event Save. They
will also be displayed on the front panel menu display while opening menus described in
section 8 “Event Memory”.